Grind & Drip Coffee Maker FIKA
使い方
Before First Use
■Wash components Wash included components and removable components, and let them dry completely.
■Run hot water: clean interior Reference the following usage steps 1 through 9 to run hot water through the product without using coffee beans (or grounds), to clean the interior of the product.
Add water to the water tank (up to the MAX line).
Attach the permanent filter, filter holder and mill to the main body.
Close the lid without adding coffee beans (or grounds), and place the glass pot on the warming plate.
Plug the power cord into an outlet, turn the power switch on, and press the coffee grounds mode button.
Drip with hot water only. Repeat this process of dripping with hot water while throwing out the hot water in the glass pot.
1: Set the mill and permanent filter into the filter holder
*Lock the mill into place by turning it in the direction marked “LOCK” (clockwise).
2: Set the items from Step 1 into the main body
Place the items from Step 1 into the main body, turn clockwise until it clicks, and firmly attach.
*If the components are not fully attached, the lid will not fit.
3: Pour water into the water tank
Open the lid of the water tank, and add the necessary amount of water while checking the water level window.
4: Put the glass pot in place
Set the glass pot onto the warming plate.
5-1: For use with coffee beans
Check that the mill is locked. After checking, add coffee beans using the included measuring spoon. See below for quantities.Try to spread the beans evenly.
For 1 cup of coffee, use 4 measuring spoons (about 16g)
For 2 cups of coffee, use 5 measuring spoons (about 20g)
For 3 cups of coffee, use 6 measuring spoons (about 24g)
For 4 cups of coffee, use 8 measuring spoons (about 32g)
5-2: For use with coffee grounds
Check that the mill is locked. After checking, open the lid to the permanent filter, and add coffee grounds with the included measuring spoon. See below for quantities. Try to spread all of the coffee grounds evenly, and close the permanent filter lid.
For 1 cup of coffee, use 4 measuring spoons (about 16g)
For 2 cups of coffee, use 5 measuring spoons (about 20g)
For 3 cups of coffee, use 6 measuring spoons (about 24g)
For 4 cups of coffee, use 8 measuring spoons (about 32g)
6: Close the lid of the main body
Position the steam vent of the lid facing forward, and press straight down to close.
*The power switch will not turn on if the lid is not completely shut.
7: Turn on the power switch
Plug the power cord into an outlet.
Sequence 1: The power button will blink twice and turn off.
Sequence 2: Turn the power button on. The power button will blink.
8: Select the drip button
When the power button blinks, press the mode button that fits the coffee beans or grounds you are using.
For coffee beans, choose from one of the two bean illustration buttons depending on the amount of beans. For coffee grounds, selected the button with the coffee grounds illustration.
8-1: For using coffee beans
For making 1-2 cups of coffee
Press the bean mode button for 1-2 cups
For making 3-4 cups of coffee
Press the bean mode button for 3-4 cups
*The photo on the right shows the button for making 1-2 cups of coffee.
8-2: For using coffee grounds
Press the grounds mode button.
9: Finished
Dripping is complete when the selected mode button turns off.
Forty minutes after dripping starts, the power will turn off and warming will stop.
Maintenance After Use 1
Remove the lid, and remove the filter holder from the main body.
With the lid removed, turn the filter holder counter-clockwise to remove.
Maintenance After Use 2
Use the included cleaning brush to remove leftover grounds from the section of the filter holder that meets the mill. Throw away the grounds inside the permanent filter as well.
Maintenance After Use 3
Coffee grains easily get stuck in the central hole part of the permanent filter, so use the included cleaning brush to remove any grounds remaining inside.
Maintenance After Use 4
Wash all components but the main body to remove all grounds.
Maintenance After Use 5
Use again after letting all components dry after cleaning.
Maintenance: Interior Cleaning
If it becomes difficult for hot water to come out due to water residue, make a mixture of 1 part citric acid to 3 parts water, and complete the usual sequence for making 2 cups, without adding coffee beans or grounds. Repeat this several times depending on the degree of soiling, and finish by dripping water only to rinse the machine.
*Run the next drip process only after allowing enough time for the main body to cool.
